Wine box with wooden ribbon, and inlays.
If you want to make your own box, The inlay parts are available. You will have to make your own basic box, and cut the ribbons from the block (loaf) with a scroll saw. Six inlay bandings will be provided. Four for the sides, one for the top, and an extra one for good measure. Also two 10" lengths of 1/8" holly stringing included, and a 8-3/4" "loaf" from which to cut the ribbon parts.
This project is for the advanced woodworker. You will have to make the basic box (I used 1/4" thick stock for the one pictured). The four vertical pieces for the box are approximately 13" tall and 4-1/2" wide, and 1/4" thick. These are mitered on the table saw and assembled without the bottom or the top. These are added after the four mitered pieces are glued-up. The glue joint where the top meets the sides is hidden with a piece of 1/8" holly stringing. Once the box is assembled, the stringing is added, then inlaybanding on the top and sides are added. The top is then carefully cut off the box. This was accomplished on a band saw, but can be done on a table saw as well.
Now comes the tedious part: making the 5 ribbon parts. Look at the pictures, and it will be apparent how these are cut from the loaf provided. The ribbon parts are finished separately from the box, then glued, using epoxy, to the top afterwards. If you have any questions, call Matt at 704-221-2147.
This is the loaf from which you will cut the ribbon components.
Cut as shown on the scroll saw.
Also included on the kit are 6 pieces of satinwood inlay banding as shown. These are 1" wide and approximately 1/16" thick.
The kit for the satinwood box: (One 8-3/4" loaf as pictured, 6 satinwood inlay bandings - 1" wide and 13-1/2" long), and two 1/8 X 10" holly strings) $62.80
If you really want to get fancy, and spend some more $$$$, of course, here is another box with walnut/maple, herringbone ribbon and inlays.
The kit for the Walnut/holly herringbone box: (One 8-3/4" loaf, 6 inlay bandings - 1" wide and 13-1/2" long), and two 1/8 X 10" holly strings) $79.80
If you want a completed box, here it is:
This is a solid black Walnut box with Satinwood/holly inlays. All hand made (including the inlays). Flawlessly finished.
Approximate dimensions: 13-1/2" X 4-3/8" X 4-3/8"
Wine is not included.
Notice the inserted thin pieces of walnut that will keep the top aligned perfectly, and provide a near, air-tight fit of the top, to the bottom of the box.
This is a unique box, for sale at $195.00 (Shipped ONLY in the US or Canada) *** SOLD****
This particular box has been sold, but if you want a similar one, I can make you one. Call Matt at 704-221-2147.>